Zubler Vario Press 330.eZR

Add Item to Favorites

Firing and pressing furnace for ceramics

Item No.

40601562 (40601562)

Hersteller Art.-Nr.

898/037eZR

Header description

Product description

The VARIO PRESS 330.eZR from Zubler is suitable for firing and pressing dental ceramics.

With the Advanced Press procedure, the furnace offers a special programme for processing lithium disilicate ceramics.

ADVANCED PRESS™
The ADVANCED PRESS™ process ensures a uniform temperature distribution from the temperature sensor of the pressing furnace to the inside of the press ring. Pressing always takes place within the ideal temperature range for pressing lithium disilicate. As a result, this technology ensures perfect surfaces, minimal reaction layers and extremely short pressing times.

TTC mode – enables linear cooling
The exceptional software and lift technology enable a linear cooling process in TTC mode: In this programme, the user determines the freely selectable cooling rate after firing. Cracks in the ceramic or the dreaded "chipping" are a thing of the past.

Vollautomatische, dynamische Pressdruckregelung
The electronically controlled pressing power regulation recognizes the required pressing forces during the working process, depending on the geometry of the objects to be pressed. In the case of diff erent volumes or thicknesses, the VARIO PRESS 330.eZR regulates the pressing power automatically and dynamically during the entire working process. Finishing the pressing process too early with the consequent defects on the pressed objects is nearly impossible.

Z-drying mode – effective and time-saving
When drying the ceramic in the RIO PRESS 330.eZR with its vertically and symmetrically aligned design, all objects are constantly and measurably at the same distance from the heat source. The lift position is calculated on the basis of the temperature in the firing chamber and the ceramics are dried at a constant temperature of 150 °C. The decisive advantages are:

Cracks or bubbles are prevented by controlled drying with the Z-Drying mode.
The Z-Drying mode eliminates time-consuming waiting during subsequent firing. The work can be placed on the firing base well before the programmed start temperature is reached.

Full Touch Display and intuitive menu navigation
The VARIO PRESS 330.e presents itself with a large and wellarranged full touch display. The modern and contemporary menu navigation represents more e ciency and operating comfort. Whether editing for one-time a running programme or permanently changing the programme parameters - working with the VARIO PRESS 330.eZR proves to be child‘s play.

EASY Light Display
Optimum visibility from all viewing angles – even at greater distances and under difficult lighting conditions such as bright sunshine.

Safety through PFC (Power-Fail-Control)
In the event of an unforeseen brief interruption of the power supply, the PFC is activated. When the interruption is over, the electronics return to the point in the programme where the interruption occurred and terminate the programme as normal.

USB Port Download Service Center
After successful registration of the VARIO PRESS 330.eZR in the service area of the Zubler homepage, Zubler grants access to an extensive database. Users can download the required programs or current software from the library of all dental ceramics on the market. In addition to the extended warranty, all services are available in the download centre and users are thus always technically up-to-date.

EASY Light Display
Optimum readability from all viewing angles – even at greater distances and in difficult lighting conditions such as extreme sunlight.

USB connection
Easy data transfer and programme backup via USB stick.

Technical data